Screens and outputs / Screens

Screens

Send the program to every screen connected to the computer, and control each screen on its own.

Every monitor is an output

Each connected monitor is an output, listed on the Display card in Settings → Outputs → Screens. The first is called Main screen; type in an output’s name field to rename it.

  • Enabled: whether this screen shows the program when you go live.
  • Display: the monitor it fills. Pick automatically takes a free monitor, and No free display shows when there is none. Movable window turns the output into a placeholder.
  • Type: Audience shows the program to the congregation. Stage shows a stage layout to the people on the platform, chosen under Stage layout (see Stage screens).
  • Background: the colour behind everything on an audience screen, black until you choose one. Clear puts it back to black. The colour stays during a blackout, so a green screen for keying stays green.
  • Timer on this screen: shows the countdown in the corner of an audience screen.
  • Blackout this screen: blacks out this screen alone.

With two or more monitors connected, the output on the screen AutoSermon runs on starts switched off each time the app opens. Switch it on under Enabled to show the program there too.

Telling the monitors apart

The map at the top of the Display card shows the monitors as the computer arranges them, each in its own colour with its number, name and size. A monitor showing the program is tagged LIVE.

  • Identify, at the top of the Display card, shows each monitor its number, colour and the name of its screen for five seconds, the way ProPresenter does, so you can see which cable goes where.
  • A monitor no screen is set to says Not used.

Right-click a screen

Right-click an output, or its tile at the top of the Display card, for:

  • Edit “<screen>” scripture theme…, or Edit “<screen>” stage layout… on a stage screen.
  • Turn off or Turn on.
  • Black out or End blackout.
  • Remove placeholder, on a placeholder, or Remove screen, on a screen whose monitor is unplugged.

Placeholders

Add placeholder creates an output in a window with no monitor behind it. Move and resize it like any window.

  • Set up sample screens adds four placeholders. Stage and Confidence monitor are stage screens on the Current & next layout. Livestream has the Lower third themes on a green background, for keying. Audience has the Clean slide theme with the Upper half scripture and AI notes themes.
  • Running Set up sample screens again updates those four, found by name, rather than adding more.
  • A placeholder is removed with Remove beside its name. A monitor’s output can only be switched off, or removed once its monitor is unplugged (see Plugging and unplugging monitors).

Going live

You can send slides and verses while the output is off. The Program preview shows them, but the screens stay dark until you go live.

  1. Click Output off in the header, or press Ctrl+Enter (Cmd+Enter on a Mac). The button changes to Output on. Each enabled screen opens full screen on its monitor, and each placeholder opens in its window.
  2. Click Output on to turn every screen off.

Output → Output On and Output Off in the menu bar do the same. To switch off one screen from the screen itself, move the mouse over it and press Esc, or click the ✕ that appears.

Output on at launch

The output comes on as AutoSermon opens when a screen that is switched on is on another monitor or is a placeholder, so the screens are ready before the service. It never comes on over the only monitor there is.

  • To open with the output off, turn off Output on at launch on the Output card in Settings → Outputs → Screens.

The Program preview

The Program preview, on the Presentation and Bible screens, shows what is on the screens. The line under it says where the program is live, such as Live on Main screen, Livestream.

  • The button at the bottom right chooses what the preview shows: All outputs tiles every screen, or pick one. Web display turns the web display on or off, and Output settings… opens Settings → Outputs.
  • The button beside it switches looks (see Looks).
  • Right-click the preview to clear a layer, Edit scripture theme, Open on Display <n> (puts the first output on that monitor and turns the output on), or open Output settings….

Clearing and blackout

The program has six layers, bottom to top: video input, media, the slide or verse, props, messages and audio. Clear all, above the Program preview, takes them all down; the icons beside it clear one layer each and are lit while their layer has something on it. Right-click the preview for the same choices.

  • Clear all (Shift+X): every layer. Output → Clear Output (Ctrl+Shift+X) does the same.
  • Clear slide (Shift+C): the slide or verse. The background stays.
  • Clear media (Shift+M): the background. The slide stays.
  • Clear props (Shift+P) and Clear messages (Shift+E).
  • Clear video input (Shift+V): the camera beneath the media (see Video inputs). Clear audio (Shift+U): the track from the Audio tab.
  • Blackout (Shift+B, or Output → Blackout) hides everything on every audience screen, props and messages included, without clearing it. The header shows Blacked out; click it to bring the screens back.
  • A screen blacked out on its own shows in the header too, such as Livestream blacked out. Clicking it ends every blackout.
  • Clear after, on the Automatic slides card in Settings → Outputs → Screens, takes down what the app put up by itself (verses, AI notes, song lines) once it has sat unchanged for that many seconds: 120 by default, 0 to turn it off. What you put up yourself stays.
  • Playback size, on the Video card in Settings → Outputs → Screens, is the largest video the screens play: a larger one plays from a lighter copy (see Media).

Themes for each screen

Each audience screen lays out scripture and AI notes with its own themes, and can restyle slides with a slide theme. Slides appear as designed unless the live look gives the screen a Slide theme (see Looks).

  • Default themes, in Settings → Outputs → Screens, sets the scripture and AI notes themes for every screen without its own. Theme editor → Open opens the editor.
  • To change one screen’s scripture theme, right-click it and choose Edit “<screen>” scripture theme….
  • To check every screen at once, choose All outputs in the menu under the Program preview.

Plugging and unplugging monitors

  • A screen whose monitor is unplugged stays in Settings → Outputs → Screens as a tile marked Disconnected. It keeps its name, themes, layers and place in every look, and opens nowhere else. The other screens carry on.
  • Plug the same monitor back in, even after a restart, and the screen picks up where it left off. Each screen knows its monitor by name, size and place in the computer’s display arrangement, so with one monitor missing the others still show their own screens.
  • A different monitor gets a screen of its own. A monitor plugged in while the output is on arrives switched off, with a message saying so; switch it on under Enabled.
  • To remove a screen whose monitor is gone for good, right-click its tile and choose Remove screen.