Screens and outputs / Video inputs

Video inputs

Show a camera or a capture card live on the screens, beneath the media or inside a slide.

Adding a camera

Cameras and capture cards plugged into this computer are set up in Settings → Inputs → Video. Each one shows a live preview.

  1. Press Add video input.
  2. Name it, such as Pulpit camera, and choose its device.
  3. Choose the Resolution asked of it: Auto, 720p, 1080p or 4K, and 30 or 60 fps.
  4. Choose the sound that plays with it: No sound, or one of the audio inputs below.
  5. Turn on Mirror for a camera facing the speaker, to flip it left to right.

A device that is unplugged keeps its place and says not plugged in. Plug it back in and it is used again.

Audio inputs

Settings → Inputs → Audio lists the sound inputs a video input can take its sound from, such as the capture card’s own audio or a line from the sound desk. Press Add audio input and choose its device.

  • A video input’s sound plays out of this computer while the video input is up, and stops when it comes down.
  • Removing an audio input leaves the video inputs that used it with no sound.

On the screens

Click Video inputs in the media dock’s sidebar, then click a camera to put it on the video input layer, beneath the media, on every audience screen. Its tile is tagged LIVE while it is up.

  • A picture or video on the media layer covers it, and so does a slide with a background of its own. Use a slide with no background to show words over the camera.
  • Clear video input (Shift+V), above the Program preview, takes it down. So does Clear video input on the tile’s right-click menu, and Clear all.
  • To leave it off one screen, untick Video input for that screen on the Looks card in Settings → Outputs → Screens.

In a slide or a theme

In the slide editor, the Video input tool (the camera icon), or Add video input on the canvas’s right-click menu, adds a Video input layer. Choose the camera and how it fits in the Layer tab: Scale to Fill, Scale to Fit or Stretch to Fill.

  • Added in a theme, the camera shows on every slide that takes the theme, such as a picture-in-picture beside the words.
  • Slide thumbnails show where the camera goes, with its name, rather than the picture itself.