Recording the service
Record video and audio of the service to files on this computer.
Video and audio
The Recorder screen has two recorders side by side. Video records a camera with a microphone mixed in; Audio records a microphone on its own. The audio recorder is off until you press Enable audio recording, or switch on Audio-only recording in Settings → Recorder.
Making a recording
- Open Recorder in the header.
- At the top of the Video panel, pick the camera and the microphone to mix in.
- Wait for READY and the camera preview.
- Press the round record button. The clock runs and REC shows over the preview.
- Press ▮▮ to pause and ▶ to carry on in the same file.
- Press the record button again to stop. A message gives the saved file’s path.
- The Audio panel has its own microphone and record button, and Disable to turn it off again.
- CAM turns the camera off; Turn camera on brings it back.
- If a device is missing, right-click the screen and choose Refresh devices. Recorder settings… is on the same menu.
Shift+R from any screen
Shift+R starts and stops recording from any screen: video, and audio too when Audio-only recording is on. Change or turn off the key in Settings → Hotkeys (Start / stop recording).
Where files go
Recordings go to the recordings folder in AutoSermon’s data folder, in a video and an audio folder. Choose another place with Settings → Recorder → Output folder.
- Right-click the Recorder screen and choose Open recordings folder to see them.
- Settings → Recorder → Recordings folder shows the free space, with Open folder beside it.
File names
Each file is named after the item shown as Current on the Timer when the take started, then the date and time. With no item, it uses the transcript’s title, or else Service. Settings → Recorder → File name chooses Session and time or Time only.
Sermon-2026-09-27_10-30-00.mp4Format and quality
Recordings are MP4, or WebM where this computer cannot make MP4. The format shows at the top right of each recorder.
- Video bitrate, in Settings → Recorder, runs from 2 Mbps (small files) to 20 Mbps (archival). 6 Mbps is recommended.
- An hour of video takes about 2.7 GB at 6 Mbps, and about 9 GB at 20 Mbps.
Disk space
The Storage bar at the top of the Recorder screen shows how full the recordings drive is. It turns amber and then red as space runs low.
Under 2 GB free, a warning appears during a take: the recording may stop early. Free space or choose another output folder before the service.
With no camera
Without a camera, the Video panel says No camera found and the record button stays off. Shift+R warns that nothing is being recorded.
- To record sound only, turn on Audio-only recording and use the Audio panel’s record button, or Shift+R.
- If the camera opens but its microphone does not, the video records without sound and the panel says so.
- When a device cannot be opened, the panel offers Retry camera or Retry microphone, and Troubleshoot…, with Request access and Open permission settings.