Order of service and timer
Build the running order on the Timer screen, time each part of the service, and let AutoSermon follow it.
Schedules
The Timer screen holds one schedule at a time: the running order for a service. Its name is beside the Timer title; click it to rename the schedule.
- Load schedule ▾ → Load schedule lists your saved schedules. Pick one to load it, or choose Start new schedule… and name it.
- Save template saves a copy under a new name; the current schedule stays loaded. Save as template, on the Load schedule ▾ menu, does the same.
- Schedules lists every saved schedule, with Load and × (delete). Save current as template is at the bottom.
- Load schedule ▾ → Export schedule… saves the loaded schedule as a schedule file (.assched), for From file… on another computer.
A deleted schedule goes to Settings → Recovery, where Restore brings it back. Deleting the loaded schedule clears the Timer too.
Getting a schedule in
The first four are under Load schedule ▾ → Load schedule.
- From file… loads a schedule file (.assched), or the schedule in a service file (.assvc).
- From image (AI) reads a photo or screenshot of a printed run sheet into the loaded schedule, in place of its items, and names it Imported schedule. Start a new schedule first to keep the one loaded. It needs an AI provider.
- From network… loads the schedule another AutoSermon computer on your network has, as a new schedule.
- Build one from a playlist makes a schedule with one timed item per playlist item, named after the playlist with “(songs)” added. Each song’s item names the playlist under Songs. Load into timer schedule, on a playlist’s right-click menu, does the same.
- File → Import… with a run sheet (Word, PDF or text) makes a schedule for each service on the sheet. Import the song sheets in the same pick and each service gets its own playlist, named under Songs on the items that sing from it.
From network… needs the other computer’s local server running, with this computer’s IP address under Settings → Network → Network sync → Peers there. If it is missing, the message names the address to add.
Adding items
- Press + Add session.
- Name the item under Session, for example Praise & Worship.
- Check the Type. It is guessed from the name; change it if the guess is wrong.
- Set a Start time if the item has one. Left empty, the item follows the one before.
- Set the Duration in minutes and, optionally, the Minister and Notes.
- For a singing item, pick its playlist under Songs. For a sermon with slides, pick it under Presentation, where items are listed by folder. Type in either list to find one.
- Press Add session, or Ctrl+Enter (⌘Enter on a Mac).
- While Auto runs, a session follows only what it names under Songs and Presentation; one with no playlist puts no song up. To have it use the songs of the rest of the service, turn on Follow songs outside the session in Settings → Bible & AI → General.
- Auto live, in the same dialog, sets what may go on screen by itself during this item: Use the setting (Settings → Bible & AI), Nothing, or your pick of Songs, Verses, Points, Applications, Quotes and Summaries. Nothing includes songs: the song slides are yours to put up. A row with its own choice shows a tag: Nothing auto, or Auto and the number chosen.
- Each row has Start, Edit and ×. Right-click a row for Start, Edit, Duplicate, Move up, Move down and Delete.
- Drag rows to reorder them, or select one and press Alt+↑ or Alt+↓ (⌥↑ or ⌥↓ on Mac). Enter starts the selected row.
- Click the minister cell to type a name in place.
- Trigger sends a chosen slide live when the item starts: pick the Service item and the Slide, each with a search box. It is offered only for items with no Songs playlist; an item imported or built from a playlist keeps the trigger it came with until you choose another playlist. Once fired, the ◈ trigger tag dims; Reset triggers arms them all again.
Session types
The Type sets what the app does in that part of the service. Each row shows its type as a tag. From the name reads the type from the session name.
- Songs: while Auto runs, follows the songs on its playlist and puts them up, unless its Auto live leaves out Songs. Verses and notes stay off the screens unless the item has its own Auto live choice.
- Sermon, Prayer, Scripture reading and Communion: verses go up, and so do AI notes (points, applications, quotes and summaries), as Auto live allows.
- Announcements, Offering, Closing and Other: verses only.
The countdown
Choose Countdown and set Hours, Minutes and Seconds, or choose Countdown to time and set a Target time. In the Hours, Minutes and Seconds fields, ↑ and ↓ change the value by 1, or by 10 with Shift held.
- Start and Pause run the clock (Shift+S). Reset returns it to the time you set.
- A new type, time or target time takes effect when you press Reset.
- Hide from display takes the countdown off every screen until you choose Show on display.
- Start on a row runs that item and sets the clock to its duration. Shift+N (Stage go next) starts the next item.
- Auto play starts the next item when the current one runs out.
- Allow overrun keeps the clock counting below zero, in red, when an item runs over. Off, the clock stops at 0:00.
- Use durations sets the clock to each item’s Duration. Off, an item runs until the next item’s Start time; an item without a start time, or the last one, still uses its duration.
- Trigger once fires each slide trigger only the first time its item starts.
- Dynamic adjustment: No adjustment, Compress remaining (shortens the items still to come so the service ends on time) or Shift all (moves every later start time).
- Compact shows only the clock, the item and what is next. Exit compact, or Esc, leaves it.
- Remote link copies the remote control address for a phone (see Web display and phone pages).
The Timer tab
The Timer tab, beside Props, Messages, Stage and Audio on the right of the Presentation and Bible screens, runs the same timer without leaving the slides. Set its Type and Time, Allows overrun and Show on screens, then Start, Pause or Reset it; a new Type or Time takes effect when you press Reset. Below, each session of the loaded schedule has its own start button, and Next starts the one after the current session.
Timer on screens
Show timer, in Settings → Outputs → Timer, puts the countdown in the corner of every audience screen, and Timer on this screen, in Settings → Outputs → Screens, sets it for one screen (see Timer on a screen, in Scripture themes). For a countdown on a slide, choose Add timer in the slide editor; it has its own format, Show session name, Hide when timer is inactive, When timer ends and On overrun options.
Following the order of service
Auto in the header runs the loaded schedule: it follows the songs, puts up scripture and moves presentations on from what it hears.
- Load the schedule on the Timer screen. Give the items start times: with them, the printed times move the service on. Without them, the app moves on from what it hears.
- Click Auto in the header and choose Start — followed by the schedule’s name.
- AutoSermon starts transcription, turns Auto live on and places the service at the item due now. The Auto button then shows the current item.
- A Songs item stays open while the room is still singing, up to 20 minutes past its time. Everything after it then runs that much later.
- A sermon with a presentation stays open while its slides are still moving.
- While a presentation is followed, the Auto menu shows its name and the slide it is on.
- While Auto runs, transcription stays on and slide triggers do not fire.
- Auto live can be turned off while Auto runs: in the Detected panel, in the Auto menu, or with A. Nothing then goes up or comes down by itself, and the Auto button turns amber.
- Stop running the service, in the Auto menu, hands everything back.
If starting shows “No songs to follow”, no session names a playlist with song items in it. Name a playlist under Songs on the singing items.
Taking over
If the app is on the wrong item, move it yourself. It stays where you put it for that item’s duration, and the rest of the schedule runs later by the same amount.
- Open the Auto menu and click the item the service is really on, or press Start on its row in Timer.
- The menu shows Held on and the item’s name.
- To go back to the printed times, choose Resume order of service.
If you load a different schedule in Timer while Auto is running, the Auto menu offers Switch to that schedule. The running service does not change until you choose it.